• Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Bromberg, Staudt & Co. GmbH

  • Home
  • About us
  • Our services
  • Industries
  • Brands
    • Endress+Hauser
    • EAGLE Burgmann Mechanical Shaft Seals
  • Contacts
  • EnglishEnglish
    • EspañolEspañol
    • TagalogTagalog
    • 한국어한국어
    • 中文 (中国)中文 (中国)
    • DeutschDeutsch
Home / Grundfos / Grundfos Pump PN 96501223 CR10-18 A-FJ-A-E-HQQE

Grundfos Pump PN 96501223 CR10-18 A-FJ-A-E-HQQE

Grundfos Pump PN 96501223 CR10-18 A-FJ-A-E-HQQE

(c) Grundfos Pump CR10-18
(c) Grundfos Pump CR10-18

Vertical, non-self-priming, multistage, in-line, centrifugal pump for installation in pipe systems and mounting on a foundation.
The pump has the following characteristics:
– Impellers and intermediate chambers are made of
– The shaft seal has assembly length according to EN 12756.
– Power transmission is via cast iron split coupling.

Typical specification Grundfos Pump PN 96501223 CR10-18 A-FJ-A-E-HQQE

Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³

Technical:
Speed for pump data: 2919 rpm
Rated flow: 10 m³/h
Rated head: 149.4 m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals on nameplate: CE, EAC,ACS
Curve tolerance: ISO9906:2012 3B

Materials:
Base: Cast iron
EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC

Installation:
Maximum ambient temperature: 60 °C
Maximum operating pressure: 25 bar
Max pressure at stated temp: 25 bar / 120 °C
25 bar / -20 °C
Type of connection: DIN / JIS
Size of inlet connection: DN 40
1 1/2 inch
Size of outlet connection: DN 40
Pressure rating for pipe connection: PN 25
Flange rating inlet: 300 lb
Flange size for motor: FF265

Electrical data:
Motor standard: IEC
Motor type: 132SB
IE Efficiency class: IE3
Rated power – P2: 7.5 kW
Power (P2) required by pump: 7.5 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415D/660-690Y V
Rated current: 14,4-14,0/8,30-8,10 A
Starting current: 780-910 %
Cos phi – power factor: 0,88-0,82
Rated speed: 2910-2920 rpm
Efficiency: IE3 90,1%
Motor efficiency at full load: 90.1-90.4 %
Motor efficiency at 3/4 load: 90.8 %
Motor efficiency at 1/2 load: 90.8 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F

More products

(c) Grundfos Pump CR10
Grundfos Pump PN 96500964 CR 10-2 A-FJ-A-E-HQQE
(c) Grundfos Pump NB65
Grundfos Pump PN 98154789 NB 65-200/205 A-F2-K-E-BQQE
(c) Grundfos Pump PN 96516177 CR
Grundfos Pump PN 96516177 CR 1-8 A-A-A-E-HQQE 3×230/400 50HZ

Primary Sidebar

Contact us:





    E+H Analytics

    • Orbisint Sensors / Electrodes
    • Condumax
    • DIPFIT
    • Indumax
    • Liquiline
    • Liquisys
    • Orbipac sensors
    • Oxymax
    • Smartec

    E+H Level measurement

    • Levelflex
    • Liquicap
    • Liquiphant
    • Liquipoint
    • Minicap
    • Micropilot
    • Soliphant

    E+H Flow measurement

    • Flowphant
    • Picomag DMA
    • Promag 10
      • Promag 10D
    • Promag 50
    • Promag 53
    • Promag 200
    • Promag300

    E+H Pressure measurement

    • Cerabar
    • Ceraphant
    • Deltabar
    • Deltapilot

    More products

    • CUS50D-GR2BA7A1+RA
    • CUS50D-AA2BA4A1
    • CUS50D-AA2BA7A1+RA
    • CUS51D-AAD1A4
    • CUS50D-GR2AA3A1
    • CUS51D-GRC1A7
    • CUS50D-AA2AA7A1+RA
    • CUS50D-GR2BA7A1
    • CUS51D-AAC1B4
    • CUS50D-GR2AB3A1
    • CUS51D-AAC1A4
    • CUS50D-AA2AA7A1
    • CUS51D-AAD1A7
    • CUS50D-GR2BB3A1
    • CUS51D-AAC1B3+IA
    • CUS50D-AA2BB4A1+RARB
    • CUS51D-AAD1A7+IA
    • CUS50D-GR2AB4A1+RARB
    • CUS51D-GRC1B3
    • CUS50D-GR2AA4A1+RB

    Footer

    • Contacts
    • Imprint
    • General Data Protection Regulation (GDPR) – Datenschutz
    • Conditions of Use
    • Copyright
    • Privacy Notice

    Search

    © 2023 · Bromberg, Staudt & Co.
    All product names, logos, and brands are property of their respective owners. All company, product and service names used in this website are for identification purposes only.