Endress + Hauser TM411-AA0AA0A0AA2A0X10A1X100A1B2A32AA1A1A1+C1
Endress + Hauser iTHERM TM411
AA Approval: Non-hazardous area
0 Thermowell: Not needed
A Material Wetted Parts: 316L
A0 Process Connection Type: Not needed
A0 Process Connection Size: Not needed
A Thermowell External Diameter D1: Not needed
A2 Tip Shape, External Diam. D2, Length Re: Insert (no thermowell), 3mm
A0 Surface Wetted Parts: Not needed (installation in existing thermowell)
X10 Immersion Length U: 150 mm (60-4000, insert only)
A1 Neck: Extension tube with G3/8 cap nut
X1 Neck Length E: 40 mm (35-200)
00 Lagging Length T: Predefined (not selectable)
A1 Sensor Type; Measuring Range: 1xPt100 TF; -50…400oC
B2 Insert Design; Diam. d, Sheath Material: 4-wire
MI-Cable; 3mm, 316L
A3 Accuracy acc. IEC60751: Class A (TF, 3mm)
2A Electrical Connection: 4-20mA; 1-channel TMT180
0.2K; head transmitter DIN B
A1 Terminal Head,Material,Protection Class: TA30A, alu, IP66/68, NEMA Type 4X
A1 Neck Connection Terminal Head: Thread M24x1.5
A1 Cable Entry Terminal Head: 1x Thread M20x1.5
C1 >Cable gland: 1x polyamide; -40…+100oC; IP68
