Endress + Hauser TM131-8FAAAFA1AA3AAAB0AA1AA1
Modular thermometer with resistance
sensor or thermocouple.
Metrical version with exchangeable
insert for demanding applications in the
chemical, oil/gas and power industry.
With thermowell or to be installed
into thermowell.
Measuring range: -200…+1100oC/
-328…+2012oF
(depending on the configuration).
::Fastest response times for optimal
process control through iTHERM QuickSens
insert and fast response thermowell
options.
::Maximum robustness for highest process
safety through iTHERM StrongSens insert.
::Cost savings with recalibrations
through iTHERM QuickNeck coupling
::Material selection for a wide range
of applications.
TM131-K6ET3/0
Endress Hauser TM131
8F Approval: ATEX IECEx II1/2D Ex ta/tb IIIC Da/Db
A Thermowell: Thermometer to be assembled into existing thermowell
A Thermometer Design: W/o neck, DIN43772 form 2, 3, 5, 8
AF Process/Thermowell Connection; Material: M24x1.5 female thread; 316L
A1 Thermowell Diameter; Material: W/o, insert 3mm, to be used with thermowell
A Tip Shape: Not needed (without thermowell)
A3 Immersion Length U: 80 mm
A Removable Neck Length E: 0mm, w/o neck
A Lagging Length T: 0mm, w/o lagging
A Sensor Type; Measuring Range; Material: 1xPt100 TF; -50…+400oC; 316L
B Sensor Standard; Classification: IEC60751; class A, 3-wire
0A Electrical Connection: Flying leads
A1 Terminal Head,Material,Protection Class: TA30A comfort flip cover; Alu; IP66/68
A Cable Entry Terminal Head: 1x M20x1.5 female thread
A1 Device Model: 1
