Endress + Hauser 5WBB80-AADAMBAA0AQD23GAA1
Electromagnetic flowmeter
Inline version.
Application: Suitable for elementary
measurement tasks
such as raw water intake.
International drinking water approvals.
Installation length: DVGW/ISO conform.
App; display and touch screen optional.
Communication: HART or Modbus RS485.
:: Basic meter f. Water + Wastewater
with easy-to-use operation concept.
5WBB80-J7J6/0
Endress Hauser 5WBB80
Approval; Transmitter + Sensor: Non-hazardous area
Design: Lap joint flange
Functionality: Standard transmitter
Power Supply: 100-240VAC/24VDC, Non-hazardous area
Output; Input: 4-20mA HART, pulse/freq./switch output
Display; Operation: W/o; via communication
Housing: Compact, alu, coated
Cable, Sensor Connection: Not used
Electrical Connection: Gland M20
Liner: PTFE 90oC
Process Connection: PN10, stainl. steel, lap joint flange, stamped plate EN1092-1
Electrodes: 1.4435/316L, bullet nose
Calibration Flow: 0.5%
Device Model: 1
Details: Curr. output 1: Volume flow
Current span: 4…20 mA NAMUR
4 mA value: 0 dm3/min
20 mA value: 750.00000 dm3/min
Failsafe mode current output: Max.
Damping output 1: 1.00000 s
Totalizer 1: null
Unit: dm3
Operating mode totalizer: Net flow total
Failure mode: Stop
Totalizer 2: null
Unit: dm3
Operating mode totalizer: Forward flow total
Failure mode: Stop
Totalizer 3: null
Unit: dm3
Operating mode totalizer: Reverse flow total
Failure mode: Stop
Instruments with a nominal diameter > DN25 and for process pressure > 0,5 bar may fall into the scope of the pressure equipment directive (PED) 2014/68/EU, but this option according to PED is not selected. However, the devices are designed and manufactured according to common engineering practice and therefore comply to the requirement following Article 4 (3) of the PED. The permissible area of application can be found in the diagrams 6 to 9 in the annex II of the directive.
