Endress + Hauser TM151-8JAGADCACA1A1BBAB0AD1BA1
Modular thermometer with resistance
sensor or thermocouple.
Metrical version with exchangeable
insert for heavy duty applications in
the chemical, oil/gas and power
industry.
With barstock thermowell or to be
installed into thermowell.
Measuring range: -200…+1.100oC/
-328…+2.012oF
(depending on the configuration).
::Wide range of thermowell designs
including the iTHERM TwistWell
for applications with high flow
velocities.
::Maximum robustness for highest process
safety through iTHERM StrongSens insert.
::Cost savings with recalibrations
through iTHERM QuickNeck coupling
::Material selection for a wide range
of applications.
TM151-XPU4/0
Endress Hauser TM151
8J Approval: ATEX IECEx II1/2G Ex ia IIC T6 Ga/Gb
A Thermowell: Based on ASME B40.9, flanged
G Thermometer Design: iTHERM QuickNeck
AD Thermowell Material: 316L
CAC Process/Thermowell Connection: Flange ANSI 1-1/2” 150 B16.5, Stainless Steel
A1 Immersion Length U: 110 mm
A1 Geometry Wetted Parts: Straight (complete length U)
B Lagging Length T: 75.00 mm 75 mm
B Removable Neck Length E: Predefined by design
A Sensor Type; Measuring Range; Material: 1xPt100 TF; -50…+400oC; 316L
B Sensor Standard; Classification: IEC60751; class A, 3-wire
0A Electrical Connection: Flying leads
D1 Terminal Head,Material,Protection Class: TA30D comfort, high flip cover; Alu; IP66/68
B Cable Entry Terminal Head: 1x NPT1/2 female thread
A1 Device Model: 1
